Services Include:

• Engine Component Balancing
• Cylinder Block Preparation
• Milling
• Boring
• Honing
• Align Honing
• Clearancing for Stroker Crankshaft Assemblies
• Connecting Rod Reconditioning
• Piston Machining
• Cylinder Head Machining
• Milling
• Cylinder Head Porting

Honing and Boring Services

• Cylinder Hone - Deck Plates Nominal Size
• Cylinder Hone - Piston Fit to Deck Plates
• Cylinder Boring .030 over Max
• Cylinder Boring .030 to .060

Align Honing and Boring Services

• Align Hone 2 bolt block
• Align Hone 4 bolt block
• Align Hone Crossbolted block (Ex. Mod, LSx FE)
• Align Bore to Nominal Bore Size

Decking and Block Deburr Services

• Deck Block- Cleanup Cut
• Deck Block- Max 30
• Deburr Block- Major surfaces and edges, oil passages, bottom of bores
• Deburr Block- Full Race Prep

Block Sleeving and Cam Bearings

• Install Sleeves-8 Sleeves installed and decked
• Install 1 Sleeve 1 Sleeve installed decked
• Install Roller Cam Bearings
• Install and Remove Cam bearings- Regular bearings

Miscellaneous Block Procedures

• Wash and Degrease Block
• Burn and Blast Block
• Measure and Inspect Block-Bore Size, Main Bore Size, Deck Height

Piston and Rod Procedures

• Remove rods from Pistons- Press Fit
• Remove rods from Pistons- Full Floating
• Pin Fit Rods- .003 max stock removal
• Pin Fit Rods-.003-.005
• Pin Fit Pistons-.003 max stock removal
• Pin Fit Pistons-.003-.005
• Rod Bearing Clearances- clearances done to .0002 tolerance

Head and Intake Machining Operations

• Mill intake surfaces max .030 - no china wall
• Mill intake surfaces max .030 and china wall
• Mill Cylinder Heads max .010
• Mill Cylinder Heads max .030
• Add Fuel Injection Bosses

Cylinder Head Operations

• Hand Porting & CNC Porting
• Valve Job- 16 Ports 3 angle
• Valve Job- 24 Ports 3 angle
• Valve Job- 32 Ports 3 angle
• Disassemble Heads and degrease
• Assemble Heads
• Install Guides- 16 Guides and hone to size
• CC Chamber
• Flow Test Cylinder Heads- 1 intake and 1 exhaust port

Click here to read more about our "Butler Process" for machining, rotating assembly balancing, engine, and engine kit preparation.